Detail Specifications
Overall Length:
2.937 inches
Overall Height:
2.281 inches
Body Length:
2.687 inches
Distance Between Centerlines Of Mounting Facilities Parallel To Body Length:
1.937 inches
Vibration Resistance Range In Hertz:
+2.0/+50.0
Distance Between Centerlines Of Mounting Facilities Parallel To Body Width:
0.937 inches
Operating Tempurature Range:
-55.0/+85.0 degrees celsius
Operating Tempurature Range:
-55.0 to 85.0 degrees celsius
Average Life Rating In Hours:
10000.0
Source Impedance Rating Per Function:
10.0 kilohms single high pass
Source Impedance Rating Per Function:
10.0 kilohms single low pass
Source Impedance Rating Per Function:
10.0 kilohms single high pass 1st function
Source Impedance Rating Per Function:
10.0 kilohms single low pass 2nd function
Load Impedance Per Function:
10.0 kilohms single high pass
Load Impedance Per Function:
10.0 kilohms single low pass
Load Impedance Per Function:
10.0 kilohms single high pass 1st function
Load Impedance Per Function:
10.0 kilohms single low pass 2nd function
Mounting Facility Screw Thread Series Designator:
Unc
Inclosure Type:
Hermetically sealed
Mounting Facility Type And Quantity:
4 threaded stud
Mounting Facility Type And Quantity:
4 threaded stud 1st function
Insertion Loss At Reference Frequency Per Function In Decibels:
1.0 single high pass
Insertion Loss At Reference Frequency Per Function In Decibels:
1.0 single low pass
Insertion Loss At Reference Frequency Per Function In Decibels:
1.0 single high pass 1st function
Insertion Loss At Reference Frequency Per Function In Decibels:
1.0 single low pass 2nd function
Functional Terminal Type And Quantity:
1 wire hook ground 3rd function
Functional Terminal Type And Quantity:
2 wire hook input 1st function
Functional Terminal Type And Quantity:
2 wire hook output 2nd function
Maximum Dielectric Withstanding Ac Rms Voltage:
100.0 volts at altitude
Thread Size:
0.112 inches
Style Designator:
Rectangular terminal/terminals on adjacent surfaces
Test Data Document:
18876-10237097 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Item Name:
Filter,high Pass-low Pass
Manufacturer Part Numbers
No other part numbers with same form, fit, and function found.
